Description
CLAW COUTURE LEATHER PICKING TIP
This tapping claw - pricking point allows you to make several diagonal holes with a single stroke of the mallet for a regular saddle stitch seam.Each point is 2.3 mm wide and the center distance between each tooth is 5.40 mm (N°5) . Ideal for your large leather goods work.
Dimensions :
| Teeth | Blade width | Total tool length |
| 1 | 2.3mm | 122mm |
| 2 | 7mm | 122mm |
| 5 | 23mm | 135mm |
| 10 | 50mm |
160mm |
Tooth length for maximum leather thickness: approximately 9 mm
Very high quality forged and then tempered steel blade.
Very high resistance to wear.
Info :
- The higher the number of the claw, the closer the stitches will be, the tighter the seam.
Sold individually
Made in France
What spacing should I choose for my creation ?
The center distance is the distance between two points: it must be chosen according to the item you wish to create (aesthetic choice).
The different center distance / wire diameter combinations give different aesthetic results: the choice is yours!
Table given for information purposes only:
| Leather item | Total leather thickness | Center distance | Wire diameter |
| Small item (e.g. binding, small leather goods) | Max. 2.5mm | 2.5 to 3.38mm | 0.30 to 0.53 mm |
| Medium item (e.g. leather goods) | Max. 4mm | 3.38 to 3.85mm | 0.54 to 0.70 mm |
| Large item (e.g. furnishings, saddlery, luggage) | Max. 7mm | 4 to 6.75mm | 0.76 to 1.30 mm |
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
