Description
LEATHER COUTURE LABEL PRICKING TIP
This tapping claw - pricking tip allows you to make several diagonal holes with a single stroke of the mallet for a regular saddle stitch seamEach point is 1.5 mm wide and the center distance between each tooth is 2.25 mm . Ideal for your leatherwork.
Dimensions :
| Teeth | Blade width | Total tool length |
| 1 | 1.5mm | 122mm |
| 2 | 3mm | 122mm |
| 5 | 10mm | 122mm |
| 10 | 21mm |
125mm |
Tooth length for maximum leather thickness: approximately 9 mm
Very high quality forged and then tempered steel blade.
Very high wear resistance.
Info :
- The higher the number of the claw, the closer the stitches will be, the tighter the seam.
Made in France
Sold individually
Which spacing should I choose for my creation ?
The center distance is the distance between two points: it must be chosen according to the item you wish to create (aesthetic choice).
The different center distance / wire diameter combinations give different aesthetic results: the choice is yours!
Table given for information only:
| Leather item | Total leather thickness | Center distance | Wire diameter |
| Small item (e.g. binding, small leather goods) | Max. 2.5mm | 2.5 to 3.38mm | 0.30 to 0.53 mm |
| Medium item (e.g. leather goods) | Max. 4mm | 3.38 to 3.85mm | 0.54 to 0.70 mm |
| Large item (e.g. furniture, saddlery, luggage) | Max. 7mm | 4 to 6.75mm | 0.76 to 1.30 mm |
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
