Description
LEATHER SEWING CLAW 1 TOOTH - REVERSED STITCH
This striking claw has a reverse / symmetrical point compared to the "standard" point. This stitch is generally used to sew double-dogging or to make a seam on a creation that has been sewn with a professional sewing machine.
Attention these are claws to mark the leather and not to pierce it (at the risk of damaging them).
Tips for use :
- Use a self-healing mat or an ERTALON plate as a cutting support.
- Your claw must be vertical when you strike.
- Strike with a wooden or polymer mallet. Do not use a steel hammer.
Impact claw 1 tooth, 1.5 mm wide .
Total tool length: 9.5 cm
Hardened steel blade.
Made in China for Deco Leather
Which spacing should I choose for my creation ?
The center distance is the distance between two points: it is to be chosen according to the item you wish to create (aesthetic choice).
The different center distance / wire diameter combinations give different aesthetic results: the choice is yours!
Table given for information only
| leather item | Total leather thickness | center distance | Wire diameter |
| Small item (e.g. bookbinding, small leather goods) | Max. 2.5mm | 2.5 to 3.38mm | 0.30 to 0.53mm |
| Medium item (e.g. leather goods) | Max. 4mm | 3.38 to 3.85mm | 0.54 to 0.70mm |
| Large item (e.g. furnishings, saddlery, luggage) | Max. 7mm | 4 to 6.75mm | 0.76 to 1.30mm |
Spec Sheet or Guide/Tutorial
Before using the product, we advise you to read the safety data sheet, the instructions for use, the blog article (guide or tutorial) or the technical sheet.
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
