What tools do you need to cut leather?
First of all, don't forget to protect your workbench and work surface with a self-healing cutting mat! And discover our special pattern-making cardboard (320 g/m2) to laminate your paper patterns before cutting (to be held on the leather with a weight or masking tape).
Classic cutter
The cutter is one of the essential tools for cutting leather.
To get a clean and precise cut, you need to choose a quality cutter and change the blade regularly so that it is always perfectly sharp. Do not hesitate to pass the blade several times to cut the leather (make several passes without pressing too hard) .
We recommend the Deco Cuir 9 mm cutter (ref. TB249) . The pointed stainless steel blade, angled at 30°, allows for clean cuts.
Rotary cutter
The rotary cutter also allows you to cut leather precisely, it is particularly useful for rounded cuts and for large straight lines.
Tranchet - The essential
This valuable leather cutting tool is used by professionals. Its high-strength steel blade must be sharpened regularly.
A good pair of scissors
Soft and thin leathers can be cut with a pair of scissors (if they are sharp) . We recommend Kaï Professionnel scissors, which are of exceptional quality!
Straight scoring knives - OKA
With a single blow of the mallet, they allow you to create a straight, clean and precise line, to make a slot for a collar button, to connect 2 round holes to create a chapure... 5 cutting widths available.
How to make a hole in leather?
Punching cutter
Round punches make it easy to pierce leather before attaching accessories, sewing, or lacing. They are used on an Ertalon plate and struck with a mallet. There are a multitude of punches, in all shapes and sizes, to create the shape of your choice in leather (pattern, slits, corners, belt ends, etc.).
Revolver clamp
The punch pliers allow you to pierce leather effortlessly (to pierce your creations with 70% less effort) and without noise. Several drilling diameters: from 1.5 to 6 mm.
Screw Punch Nonaka (the real one)
The rotary punch is a high-quality product, handmade in Japan. It allows you to punch holes (Ø 1 to 5 mm) in thick leather effortlessly and quietly.
Circular cutter
Discover the circular compass for cutting leather circles from 1.8 to 17 cm in diameter with precision and simplicity! Made in Japan - 100% quality.
HOW TO CUT A ROUNDED CORNER CLEANLY?
USING A STRAIGHT PARING KNIFE OR KNIFE - NO CUTTERS
Creating a beautiful rounded corner has never been easier than with a paring knife and the so-called "quartering" cutting technique. We do not recommend cutting a rounded corner in one go, as this may result in a poor cut.
| Rotate the piece of leather to continue cutting into quarters. | Using a straight paring knife or box cutter: start cutting into quarters. |
 |
 |
| Using a template and a round awl: trace the curve onto your leather. | Sand the curve with an abrasive sponge or sandpaper. |
 |
 |
HOW TO CUT LEATHER MANUALLY WITH A PUNCH BLADE?
Looking to cut leather with a punch blade or custom punch? Check out our manual bench presses! Punch blades can also be punched manually with a punching plate and handle.
Guides that might interest you:
|
Video - How to use a leather strap cutter?
|
Video - How to use a shoelace cutter for leather?
|
 |
 |
|
Video - How to trim leather and make a ledge?
|
Video - Using and sharpening the edger
|
 |
 |
|
Guide - How to cut leather easily with a Cricut machine?
|
|
 |
|
2 comments
Deco Cuir
Bonjour,
Si vous souhaitez couper vos propres lacets en cuir nous vous conseillons de sélectionner un cuir tannage végétal d’1 mm d’épaisseur : https://www.decocuir.com/products/demi-collet-vegetal-naturel-classic-22-105 et ensuite de couper directement votre lacet dans la peau à l’aide d’un coupe lacets : https://www.decocuir.com/products/coupe-lacets-economique-strap-cutter-cuir-maroquinerie-chaussure-lacage
N’hésitez pas à aller voir notre guide sur l’utilisation d’un coupe lacets : https://www.decocuir.com/blogs/blog-tutoriel-patron-cuir/video-coupe-lacets-cuir
Bonne journée,
L’équipe Deco Cuir
DUPUY FABIOLA
BONJOUR
je voudrais couper des lacet de cuir de 1mm épaisseur et 2mm de largeur et les teindre sur les cotés
quel outillage pouvez vous me proposer?
MERCI
ETS CREATIONS FABIOLA