You will like also
Description
BENCH PRESS ON WOODEN BASE
This Taille bench press is a professional machine for effortlessly setting snap fasteners, eyelets, and rivets with perfect clamping. You can also make holes using bench press hole punch dies and a brass anvil.
Operation is simple: just turn the handle to the right to lower the piston and apply perfect pressure.
Press features:
This bench press must be used with the PRESS setting dies.
You can also use the PLIER setting dies by using adapter Ref. PACK_121.
The upper die is fixed by a 6.2 mm diameter thread
The lower die is placed in a 12.1 mm diameter hole and held by a screw
You can also use the PLIER setting dies by using adapter Ref. PACK_121.
| Press |
Total height |
Base length |
Base width |
Internal recess depth | Internal recess height | Spacing for inserting setting dies | Weight |
| N2 |
27.5 cm | 19 cm | 7.5 cm | 7 cm | 9 cm | 4.3 cm | 3.3 kg |
| N3 |
34 cm | 14 cm | 8 cm | 8 cm | 7 cm | 4.5 cm | 4.2 kg |
| N4 |
29 cm | 23 cm | 7.5 cm | 11 cm | 9 cm | 4.5 cm | 4.2 kg |
| N5 | 31 cm | 26 cm | 8.5 cm | 12 cm | 11 cm | 4.5 cm | 6.2 kg |
The upper die is fixed by a 6.2 mm diameter thread
The lower die is placed in a 12.1 mm diameter hole and held by a screw
Made in Italy.
Features of the wooden base:
This stand includes 10 holes for storing 5 setting dies.
This stand includes 10 holes for storing 5 setting dies.
To use the press, you will only need to secure it to your table with clamps (not included).
With this setup, your press is mobile and you can take it anywhere you want!Base dimensions: 300 x 350 mm
Thickness: 32 mm
Thickness: 32 mm
Made of beech wood
Made in France
Made in France
The bench press on its base is sold without setting dies
Ordering info: No shipping outside Europe.
Which press to choose based on my use?
| Use for rivets and eyelets | ||||
| Diameter |
Press N2 | Press N3 | Press N4 | Press N5 |
| Up to 12 mm |
✔ |
✔ | ✔ | ✔ |
| 13 to 15 mm |
⚠ |
✔ | ✔ | ✔ |
| 16 to 20 mm | ✘ |
⚠ |
✔ |
✔ |
| 21 to 25 mm |
✘ |
⚠ |
⚠ | ✔ |
| Greater than 26 mm |
✘ |
✘ |
✘ | ⚠ |
| Use for hole punch | |||
| Hole diameter | Press N2 - N3 | Press N4 | Press N5 |
| 1 to 10 mm |
✔ |
✔ | ✔ |
| 11 to 15 mm |
⚠ |
✔ | ✔ |
| 16 to 18 mm | ✘ |
⚠ |
✔ |
| 19 to 20 mm |
✘ |
⚠ |
⚠ |
| 21 to 25 mm |
✘ |
✘ |
⚠ |
✔ For all types of leather
⚠ For thin and soft leathers
✘ Not recommended
The values above are indicative and may vary up or down depending on the material of the accessories (brass, iron, stainless steel, aluminum) and the thickness of the leather.
Spec Sheet or Guide/Tutorial
Before using the product, we advise you to read the safety data sheet, the instructions for use, the blog article (guide or tutorial) or the technical sheet.
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
