You will like also
RED PRESS + 3 DIE SETS
This manual N3 bench press is a professional machine for effortlessly and perfectly setting snap fasteners, eyelets, and rivets up to 15 mm in diameter. You can also make holes using bench press punches up to 10 mm in diameter and a brass anvil.
The values above are indicative and may vary upwards or downwards depending on the material of the accessories (brass, iron, stainless steel, aluminum) and the thickness of the leather.
For setting larger accessories or punching larger holes, we recommend the N4 size press.
Operation is simple: just turn the handle to the right to lower the piston and apply perfect pressure.
Base: Length: 14 cm - Width: 8 cm
Internal recess dimensions: Depth: 8 cm - Height: 7 cm
Spacing for inserting die sets: 4.5 cm
Total weight of the press: 4.2 kg
Base dimensions: 300 x 350 mm - Thickness: 32 mm
The upper die is fixed by a 6.2 mm diameter thread.
The lower die is placed in a 12.1 mm diameter hole and held by a screw.
Made in Italy.
Spec Sheet or Guide/Tutorial
Before using the product, we advise you to read the safety data sheet, the instructions for use, the blog article (guide or tutorial) or the technical sheet.
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
