Double action airbrush kit with 3 needles - Fengda FE-182K

AIRBRUSH FOR LEATHER DYEING

This Fengda FE-182K airbrush kit, supplied with its storage case, allows you to dye your leathers or color your creative hobbies by spraying dyes, paints, varnishes, etc. evenly and quickly.

The kit includes 3 needles with diameters of 0.3mm, 0.5mm, and 0.8mm to adapt to your different projects: the larger the needle, the greater the quantity of dye projected.
It comes in a plastic box with integrated foam to safely store and transport your airbrush.

This airbrush is easy to use and suitable for both professionals and beginners.
It is double-action: the air and dye flow are separated, allowing for gradients and very fine lines. The trigger is flexible and responsive to easily control the flow. The wheel at the back of the airbrush allows you to block the amount of dye that reaches the nozzle.
It is a suction-feed airbrush: the dye reservoir is below the gun, which allows for dyeing large pieces.
To operate, it must be used with a compressor (pressure: 1 to 3 bars).

Included in the kit:
- 1 double-action airbrush (Length: 16 cm - Height: 4 cm)

- 3 stainless steel needles with diameters: 0.3mm, 0.5mm, and 0.8mm

- 1 glass bottle of 22 ml with plunger

- 1 hose 1.80 m long with 1 connection for the airbrush and 1 1/8" female connection for the compressor

- 1 plastic pipette

- 1 wrench
- 1 storage box
- 1 English manual

Deco Cuir Tips:
- We advise you to select a natural vegetable-tanned leather for full coloring.
- You can also use it on mineral-tanned leather for recoloring. In this case, choose your paint carefully. Prior tests on leather scraps are necessary.
- Prioritize alcohol-based dyes as they are more fluid and penetrate the leather better.
- If you use paint, you will need to dilute it. The perfect dilution for the vast majority of paints is to have the consistency of milk. Find the 2-THIN thinner for Angelus paint (ref. WA066) in our shop.

Made in China
Read the instructions carefully before use.

INSTRUCTIONS FOR USE:
- Work in a ventilated area and protect your workspace.
- Connect the airbrush to the compressor.
- Fill the reservoir with dye (or other compatible liquid material).
- Press the airbrush trigger to release compressed air from the compressor.
- Pull the trigger back (while keeping it pressed) to gradually bring out the dye.
- Polish the leather with neatfoot oil and a soft cloth.
We advise you to watch the video for more information.

Info: the closer the airbrush tip is to your surface, the finer the line will be. The closer you are to your surface, the less dye you should spray to prevent it from dripping.

Cleaning tips: Clean your airbrush after each use with acetone to keep it in good condition. The airbrush is fully disassemblable for easy maintenance.