You will like also
TOOL FOR REMOVING SNAPS AND RIVETS
You've spent hours creating a perfect piece, but a poorly placed snap or rivet can ruin everything. Don't let these mistakes spoil your leather creations anymore! This anvil is specially designed to easily remove rivets and snaps, without damaging the leather. It will also be very useful for removing a jeans snap.
This steel anvil is used with a handle to remove snaps and rivets (sold separately - ref. TA951).
This tool can remove:
- Single and double cap rivets
- Male and female parts of strong snaps (ring spring)
- Female parts of S-spring snaps (to remove the male part, you need to use cutting pliers)
Choose the anvil size that matches the size of the accessory you want to remove. The hole must be able to fully contain the accessory, but it should not be too large to avoid stretching the leather when striking.
4 sizes are available:
|
Hole Diameter |
Recommended diameter of accessories to remove | Deco Cuir rivet correspondence |
| 7.5 mm | 5 to 7 mm | T2 / T3 |
| 9.8 mm | 7.5 to 9.5 mm | T3 / T4 |
| 13 mm | 10 to 12.5 mm | T6 |
| 15.5 mm | 13 to 15 mm | T7 |
Outer diameter of the anvil: 36 mm
The thickness of the anvil is 15 mm to prevent the striking handle from touching the workbench and deforming.
OKA is a Japanese manufacturer passionate about leather craft. They produce high-quality tools, pleasant to use and suitable for both beginners and experienced crafters.
Sold individually
Made in Japan ("MADE IN JAPAN" marking and hole diameter indicated on the anvil)
Brand: OKA
Spec Sheet or Guide/Tutorial
Before using the product, we advise you to read the safety data sheet, the instructions for use, the blog article (guide or tutorial) or the technical sheet.
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
