Professional rechargeable heated wire cutter - Craftplus 88930

SEWING THREAD BURNER

This Craftplus heated thread cutter is the ideal tool for precisely sealing your seams for a perfect and professional finish.

The heating head allows you to burn synthetic threads (polyester, nylon, etc.) as well as waxed threads as close as possible to your seam. Ideal for finishing your sewing and avoiding unsightly protruding ends. The fine, long tip allows access to hard-to-reach areas.
Versatile, this heated thread burner is also very useful for preventing fraying of straps.
It is perfect for your sewing work, leathercraft, saddlery, creative hobbies, etc.

This heated thread cutter is not suitable for linen or cotton threads.

Instructions for use :
- To turn on the thread cutter, press the button 5 times quickly. The white indicator light flashes 3 times to indicate that it is in standby mode.
- Two operating modes are possible:
   ✔️ Instant mode: Press and hold the button to activate the heating function at 100% of its power. The button lights up when the thread cutter is heating. When you release the button, it stops heating.
  ✔️ Continuous operation mode: Press the button 3 times quickly to activate continuous mode at 70% of the heating power. The button flashes in multiple colors. After 5 minutes, the device will automatically return to standby mode.
- Press the button 5 times quickly to turn off the thread cutter.
- The thread cutter automatically turns off after 30 minutes of inactivity in standby mode.
- Clean the heating head with the cleaning brush before storing the thread cutter in its box.
- If you do not use the thread cutter for an extended period, fully charge it and remove the heating head before storing it. The battery should be charged at least every 6 months.

Integrated luminous battery indicator:
- More than 70%: white light
- 30% to 70%: blue light
- Less than 30%: red light

Features:
- Handle diameter: 16.5 mm
- Length to heating tip: 160 mm
- Total length with cap: 170 mm
- Weight: 60 g - Lightweight and easy to handle
- Battery capacity: 1100 mAh
- Charging time: 2 to 3 hours
- Charging method: USB-C. The indicator light will be red during charging and turn green when charging is complete. You can use the thread cutter while charging.
- Charging voltage: 5 V
- Maximum power: 12 W
- Rated voltage: 3.7 V
- Continuous working time: 25 minutes

Included:
- 1 thread cutter with a powerful battery
- 1 heating head
- 1 protective cap
- 1 cleaning brush
- 1 USB-C charging cable
- 1 storage box
- 1 English manual

Replacement heads are available for purchase separately (ref. 88930-91) if the original one is damaged.

Contains a lithium battery – do not wash with water.
Do not touch the heating head when it is hot.
Warranty: 1 year on electronic components. 3 months on mechanical parts.
Made in China
Brand: Craftplus, distributed by Ivan