40mm roll of heat press foil transfer film -MONEY

METAL FOIL ROLL

This roll of foil transfer film is used with heated brass characters to quickly and easily personalize your leather. The metallic effect enhances and brightens the marking of your text.

Available in several colors: gold, copper or silver

Using foil with brass lettering from Deco Cuir :
The foil can be used for hot stamping by screwing the Deco Cuir character holder onto an electric threading iron or by screwing it onto the Deco Cuir brass handle.
- Cut a piece of foil to the desired length. Position the shiny side of the foil on top.
- Set the temperature of the threading iron between 100°C and 120°C. For use with the Deco Cuir brass handle, heat the brass characters with a blowtorch for example and use gloves to protect yourself from the heat.
- Apply the characters to your leather, ensuring perfect verticality (for use with the handle, you can gently tap it with a wooden or nylon mallet if necessary).
- Gently remove the foil sheet.

Use with the 3970-00 heat press :
- Recommended temperature: between 110°C and 150°C.
- Cut a piece of foil to the desired length.
- On the sliding tray, position the leather then the foil (shiny side visible).
- For most mineral-tanned smooth leathers, gently lower the press handle 2-3 times for 1 second each time to transfer the foil (do not hold the handle down for too long to avoid smudging). For vegetable-tanned leather, lower the handle only once.
- Gently remove the foil sheet.

We advise you to test on a scrap piece of the same leather in order to adjust the temperature setting, application time and pressure applied.

Dimensions :
Width: 40 mm
Length: 60 meters

Info Deco Cuir : We do not recommend applying foil to grained or suede leather.

Made in China for Ivan
Sold without press or type sets