20mm roll of heat transfer foil film - 122m -Or

FOIL TRANSFER ON LEATHER - 122 METERS

Enhance your leather creations with this foil transfer paper. The foil is used with heated brass characters (letters, numbers, symbols) to create a glossy finish on your text.
Ideal for personalizing and embellishing your wallets, bags, belts and other leather accessories.

Available in several colors: gold, silver, bronze, black or white

Using foil with brass lettering from Deco Cuir :
The foil can be used for hot stamping by screwing the Deco Cuir character holder onto an electric threading iron or by screwing it onto the Deco Cuir brass handle.
- Cut a piece of foil to the desired length. Position the shiny side of the foil on top.
- Set the temperature of the threading iron between 100°C and 120°C. For use with the Deco Cuir brass handle, heat the brass characters with a blowtorch for example and use gloves to protect yourself from the heat.
- Apply the characters to your leather, ensuring perfect verticality (for use with the handle, you can gently tap it with a wooden or nylon mallet if necessary).
- Gently remove the foil sheet.

Use with the 3970-00 heat press :
- Recommended temperature: between 110°C and 150°C.
- Cut a piece of foil to the desired length.
- On the sliding tray, position the leather then the foil (shiny side visible).
- For most mineral-tanned smooth leathers, gently lower the press handle 2-3 times for 1 second each time to transfer the foil (do not hold the handle down for too long to avoid smudging). For vegetable-tanned leather, lower the handle only once.
- Gently remove the foil sheet.

We advise you to test on a scrap piece of the same leather in order to adjust the temperature setting, application time and pressure applied.
We do not recommend applying foil to grained leather or suede.

Dimensions :
Width: 20 mm
Length: 120 meters

Made in Italy
Sold without press or type sets