AMBER - NICKEL-PLATED key ring head

AMBRE CUSTOMIZABLE KEY RING HEAD

Create original designs with this customizable key ring.
Add a strap, a band, a ring or any accessory of your choice to create a unique key ring!

The strap is attached with 2 included rivet nails. Rivet nails can be conical or round and hollow depending on the delivery.

Assembly tips :
- Insert the leather into the key ring head and mark the location of the 2 holes with a pencil or an awl.
- Pierce the leather with a 2.5 mm diameter round punch.
- Insert the leather into the key ring head and secure the nails by hammering them or crimping them with flat, smooth-jawed pliers. Use a piece of scrap leather to avoid damaging the key ring. To fully drive in the nails, we recommend using a punch (see demonstration photo).

Material: Zamac
Finish: Nickel-plated

Dimensions :
Height: 26 mm
Outer width: 23 mm
Inner width: 20 mm
Outer thickness: 8 mm
Inner thickness of the strap hole: 5 mm
Attachment hole diameter: 5 x 4 mm

For straps or bands up to 20 mm maximum.

Delivered without strap or accessories
Made in Italy