Description
75 COPPER SNAP RIVETS - T35 (STEM DIAMETER: 3.5 MM)
Assemble your parts using the mate rivet technique. Your creation will have an authentic cachet. This assembly technique is one of the oldest and also one of the most resistant.
The head of the rivet has a slightly hammered appearance.
Material: Solid copper
Finish: Copper
| Rod length | Total length | Length in inches | Maximum leather thickness |
Tandy reference |
| 12mm | 13.5mm | 1/2" | 8mm | TL_11280_01 |
| 18mm | 19.5mm | 3/4" | 15mm | TL_11281_01 |
| 25mm | 26mm | 1" | 20mm | TL_11282_01 |
Head diameter: 9mm
Shank Diameter: 3.5mm (T35)
Washer thickness: 0.8 mm
Diameter of the washer: 9 mm
Packaging : pack of 75
Assembly instructions :
- Mounts with a setting tool for T35 or T41 peening rivets (separately).
- Make a 3 mm diameter hole in your parts to be assembled. Pass the rivet through the inside of your parts. Thread the washer, then tighten it using the fitting tool. Cut with pliers the excess, leaving about 2 mm of material. Begin caulking using the concave part of the setting tool. Complete the assembly by hammering the rod onto the washer with a hammer.
- The matting operation must be carried out on a firm work surface, you can put a plate of Ertalon to protect your support and the head of the rivet.
- We advise you to watch to learn how to put a rivet to put down.
Suitable for children over 10 years old
Made in the USA for Tandy Leather
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
