Description
75 BRASS IMPACT RIVETS - T35 (SHAD DIAMETER: 3.5 MM)
Assemble your pieces using the tacked rivet technique. Your creation will have an authentic cachet. This assembly technique is one of the oldest and also the most resistant.
The head of the brass rivet has a slightly hammered appearance.
Material: Solid copper
Finish: Copper
| Stem length | Total length | Length in inches | Maximum leather thickness |
Tandy Reference |
| 12 mm | 13.5 mm | 1/2" | 8 mm | TL_11280_21 |
| 18 mm | 19.5 mm | 3/4" | 15 mm | TL_11281_21 |
| 25 mm | 26 mm | 1" | 20 mm | TL_11282_21 |
Head diameter: 9 mm
Stem diameter: 3.5 mm (T35)
Washer thickness: 0.8 mm
Washer diameter: 9 mm
Packaging : batch of 75
Assembly instructions :
- Mounts with a setting tool for T35 or T41 rivets (separately).
- Make a 3 mm diameter hole in your parts to be assembled. Pass the rivet through the inside of your parts. Thread the washer, then tighten it using the installation tool. Cut off the excess with pliers, leaving about 2 mm of material. Start the peening using the concave part of the installation tool. Finish the assembly by peening the rod onto the washer with a hammer.
- The matting operation must be carried out on a firm work surface, you can put an Ertalon plate to protect your support and the head of the rivet.
- We recommend you watch to learn how to install a rivet.
Suitable for children over 10 years old
Made in the USA for Tandy Leather
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
