Description
EYELETS AND ROLLING WASHERS
Look no further, the essential and inexpensive kit is here!
Installing eyelets becomes child's play thanks to this kit consisting of eyelets and washers, a punch installation set and instructions.
Its practical box allows you to have your accessories well stored in all circumstances.
Suitable for leather, fabric or any other material not exceeding 2.8 mm in thickness. Beyond this, preliminary tests will be necessary.
Perfectly suitable for beginners.
Material: Brass
5 finishes to choose from: Luxury gold, Aged brass, Nickel plated, Glossy black or Old copper
Approximate dimensions of the eyelets :
| Inner diameter | Quantity | Outer diameter | Total height |
| 5 mm | 40 | 10 mm | 4.5 mm |
| 8 mm | 24 | 13 mm | 5 mm |
| 11 mm | 15 | 17.5 mm | 5.8 mm |
| 14 mm | 10 | 22.5 mm | 7 mm |
Instructions for use :
First make a hole the inside diameter of your eyelet in your part.
Insert the male part of the eyelet into the hole in the leather, place it on the anvil then fit the female part onto the male part of the eyelet.
Place the setting tool over the eyelet and strike the tool with a hammer to crimp the eyelet onto the washer and you're done!
We invite you to watch the video
Box contents :
- Rolling eyelets
- Crimp washers *
- 1 tool composed of 2 parts: an anvil and a striking handle
- 1 explanatory note
* Depending on arrivals, the finish of the washer may be smooth or with a few slightly raised points (this changes the visual appearance very little).
As always, don't hesitate to practice on a scrap to master the tool before placing your eyelet on your beautiful piece of leather.
Origin: Germany
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
