DIY kit - Seamless leather belt - BLACK - Thickness 3.1mm - Aged Brass Chicago screw -24mm / 120cm

DIY BELT KIT

Deco Cuir has created this kit for you to make your full-grain leather belt. This strap is cut from vegetable-tanned leather croupon, it has 7 holes and an ogival end.
Easy to assemble with 2 Chicago screws, you just need to choose your belt according to the width of your interchangeable buckle (compatible with pin buckles).

Beginner level: no technical knowledge is required, detailed instructions are provided. To adjust it to your size, one cut and two holes are enough.

Due to the manufacturing process, the width of the strap may vary slightly.

What size to order?
100 cm: for pant sizes (EUR) from 34 to 42
120 cm: for pant sizes (EUR) from 44 to 54

The kit includes:
- 1 leather strap, 3.1 mm thick
- 1 belt loop
- 1 chaplet
- 2 aged brass Chicago screws
- 1 assembly instruction manual

Required materials:
- 1 belt buckle
- 1 screwdriver
- 1 4 mm leather punch
- 1 cutter

Color: Black
Tanning: Vegetable
Grain: Smooth
Finish: Pigmented
Split: Resined

Deco Cuir tip: For a nice finish, you can work the edges of the leather with an edge finish or a finishing gum (e.g. Tokonole).

Leather info: This is a finished leather, which means you cannot do tooling on it, but hot stamping works very well.
On the flesh side, this leather is resined, which gives it a beautiful finish.

Origin: Italy
Designed and cut in France by Deco Cuir
Sold individually
Kit also available with Nickel-plated Chicago screws

Non-contractual photo for width