DIY kit - Seamless leather belt - BROWN - Thickness 3.1mm - Nickel-plated Chicago screw -24mm / 120cm

DIY BELT KIT

Deco Cuir has created this kit for you to make your own full-grain leather belt. This strap is cut from vegetable-tanned butt, it has 7 holes and an ogive-shaped end.
Easy to assemble with 2 Chicago screws, you just need to choose your belt according to the width of your interchangeable buckle (compatible with pin buckles).

Beginner level: no technical knowledge required, detailed instructions provided. To adjust it to your size, a cut and 2 holes are enough.

Due to the manufacturing process, the strap width may vary slightly.

What size to order?
100 cm: for pant sizes (EU) from 34 to 42
120 cm: for pant sizes (EU) from 44 to 54

The kit includes:
- 1 leather strap, 3.1 mm thick
- 1 belt loop
- 1 buckle tongue
- 2 nickel-plated Chicago screws
- 1 assembly instruction

Required material:
- 1 belt buckle
- 1 screwdriver
- 1 x 4 mm leather punch
- 1 x cutter

Color: Brown
Tanning: Vegetable
Grain: Smooth
Finish: Pigmented
Flesh side: Resined

Deco Cuir tip: For a beautiful finish, you can work the leather edges with an edge finish or a finishing gum (e.g., Tokonole).

Leather info: This is a finished leather, which means you cannot do tooling on it, but hot stamping works very well.
On the flesh side, this leather is resined, which gives it a beautiful finish.

Origin: Italy
Designed and cut in France by Deco Cuir
Sold individually
Kit also available with antique brass Chicago screws

Non-contractual photograph for width