Angelus Basic Kit - Leather Paint

LEATHER PAINT BASICS KIT ANGELUS

This Angelus basic kit of leather paints contains everything you need to customize products such as sneakers or sneakers.
Angelus paint can also be used on leather goods (belts, wallets, etc.) , saddlery, furniture or automobiles.
You can draw an original creation or create small touches of vibrant color that are difficult to achieve with traditional dyes. These paints are also used to recolor the leather if the original color has faded through wear.

This kit includes :
- 5 bottles of acrylic paints for leather of 29.5 ml: black, white, red, yellow and blue
- 1 stripper preparer of 29.5 ml
- A #6 (10mm) flat brush for square shapes, pointed edges, filling and blending.
- A #10 (17mm) flat brush for backgrounds, broad lines and blending.
- A used domed brush (Filbert) #6 (10mm) for rounded edges, covering large areas and blending.
- A #1/2" (12mm) angled (beveled) brush for corners, edges and multiple lines.

• Angelus leather paint is high quality, it is very pigmented and therefore very covering.
The paint is flexible and resistant to cracking, it has prolonged durability.
The colors mix together.

• Angelus stripper preparer is essential for thoroughly cleaning your leather support before painting.
It deglazes factory finishes on shoes, bags, saddles, etc.
It can be used on any type of leather, and only leather. Not for use on plastic or rubber.
This preparation step will guarantee better adhesion of the paint, better resistance to scratches and wear and will prevent cracking.
Be sure to let the Angelus primer and stripper dry for at least 24 hours before painting.

• The 5 brushes are made from synthetic fibers. These numerous flexible fibers allow for more stretched brush strokes and leave few traces on your support.
Maximum length of brushes: approximately 23 cm

Leather Deco Info :
Angelus paints are quality paints with a high pigment content. The paint must be mixed well by shaking the bottle vigorously before use. Some colors are difficult to mix and small lumps may appear during application. You just have to smooth them with the brush to make them disappear. This is normal and does not constitute a quality defect.

Recommendations for use for shoes :
- It is very important to prepare your shoe before it receives the paint to obtain an optimal result. Clean it carefully, even if it is new, with Angelus pre-paint preparer and cleaner.
In the case of very smooth leather such as patent leather, you can sand the surface very lightly with very fine sanding paper so that the paint sticks well.
- When painting, be sure to apply very thin layers to avoid cracking when drying. The paint is applied with a brush. Let the Angelus paint dry well between two coats. Never dry the paint with a hairdryer, it could crack.
- If you want to lighten a color, you can use neutral paint (ref. WZ720_004 ).
- Secure and protect your painting with a standard acrylic finish or a reinforced 4-coat finish. We advise you to apply 2 or 3 coats. This will greatly reduce wear and scratches on your leather.

Brush care :
- Do not let the paint dry on the brushes.
- Do not let paint enter the ferrule.
- Clean immediately after each use with Angelus brush cleaner ( WA075 ) or soapy water.
- Do not let brushes sit in water.

To learn more about tips for using Angelus paint, visit our guide .

Before embarking on your creation, always do a test first on a piece of leather or old shoes.

There is no protective cover on the bottles
Keep out of reach of children
Origin: USA for paints and China for brushes
Brand: Angelus