A 12.5mm screw-in collar button with a 3x7mm screw - NICKEL PLATED

CARTRIDGE POUCH BUTTON IN BRASS

This screw-on stud button allows you to create an elegant and practical closure on your leather creations: satchels, wallets, pouches, glasses cases... It can also be used to adjust the length of a strap (by making several holes at regular intervals to adjust the size according to your needs).

Materials: Brass (stud button) and Steel (screw)
Finish: Nickel-plated

Dimensions:
- Total height (without screw): 11.5 mm
- Ball diameter: 12.5 mm
- Base diameter: 12.5 mm
- Hanger diameter: 5.3 mm
- Height between base and ball: 2.5 mm
- Screw: 3 x 7 mm

Recommended leather thickness for screwing: up to 4.5 mm.
For thicker leather, you can use longer screws (sold separately).

ASSEMBLY:
Make a 3 mm hole in the leather, then screw on the stud button using a screwdriver.
For the head passage, punch a 5 mm hole with a round punch, then cut a slot (a preliminary test on a leather scrap is recommended to adjust the length according to your leather: start with a small slot that you can enlarge).

Over time, brass can naturally oxidize and a "verdigris" patina may appear. This is not a defect and can be cleaned with a product suitable for brass.

The stud button is also known as a cartridge pouch button or gogue ball.

Made in Italy
Sold individually