CLAW SEWING LEATHER POINT PRICKING
This hammer claw allows you to make, with a single strike of the mallet, several diagonal holes for a regular saddle stitch seam.
The pricking point is used to mark the location of the sewing holes.
Sold individually, choose the claw that suits you, its number of teeth, as well as the desired center distance.
Dimensions :
| Center distance - No. | Width of a tooth | Claw length 1 tooth | Claw length 2 teeth | Claw length 3 teeth | Claw length 4 teeth | Claw length 5 teeth | Claw length 10 teeth |
| 2.25 mm - No. 12 | 1.5 mm | 122 mm | 122 mm | - | - | 122 mm | 125 mm |
| 2.70 mm - No. 10 | 1.6 mm | 122 mm | 122 mm | - | - | 122 mm | 140 mm |
| 3.00 mm - No. 9 | 1.7 mm | 122 mm | 122 mm | - | - | 122 mm | 140 mm |
| 3.38 mm - No. 8 | 1.8 mm | 122 mm | 122 mm | 122 mm | 122 mm | 122 mm | 140 mm |
| 3.85 mm - No. 7 | 1.9 mm | 122 mm | 122 mm | - | - | 125 mm | 140 mm |
| 4.50 mm - No. 6 | 2 mm | 122 mm | 122 mm | - | - | 125 mm | 150 mm |
| 5.40 mm - No. 5 | 2.3 mm | 122 mm | - | - | - | - | 160 mm |
| 6.75 mm - No. 4 | 3.8 mm | - | - | - | - | 140 mm | 165 mm |
Tooth length for maximum leather thickness: approximately 9 mm
Info :
- The higher the claw number, the closer the stitches will be and the tighter the seam.
- The 1-tooth claws are also compatible with the Vergez Blanchard striking claws in "INVERTED" points with the same center distance.
Sold individually
Made in France
Brand: Vergez Blanchard
Reference of this article: 3.907
What center distance should I choose for my creation ?
The center distance is the distance between two points: it should be chosen according to the item you wish to create (aesthetic choice).
The different center distance/wire diameter combinations give different aesthetic results: the choice is yours!
Table given for information purposes :
| Leather item | Total thickness of the leather | Center distance | Wire diameter |
| Short article (e.g. bookbinding, small leather goods) | Max. 2.5 mm | 2.5 to 3.38 mm | 0.30 to 0.53 mm |
| Medium article (eg leather goods) | Max. 4 mm | 3.38 to 3.85 mm | 0.54 to 0.70 mm |
| Great article (e.g. furniture, saddlery, luggage) | Max. 7 mm | 4 to 6.75 mm | 0.76 to 1.30 mm |
Spec Sheet or Guide/Tutorial
Before using the product, we advise you to read the safety data sheet, the instructions for use, the blog article (guide or tutorial) or the technical sheet.
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
