Description
CLAW COUTURE LEATHER PICKING TIP
This striking claw pricking tip allows you to make several diagonal holes with a single stroke of the mallet for regular saddle stitch sewing. Each point is 1.6 mm wide and the center distance between each tooth is 2.70 mm - n°10 . Ideal for your small leather goods.
Dimensions :
Teeth | Blade width | Total tool length |
1 | 1.6mm | 122mm |
2 | 4mm | 122mm |
5 | 12mm | 122mm |
10 | 25mm |
140mm |
Tooth length for maximum leather thickness: approximately 9 mm
Very high quality forged and then tempered steel blade.
Very high resistance to wear.
Info :
- The higher the number of the claw, the closer the stitches will be, the tighter the seam.
- The impact claw No. 10 - 1 tooth is also compatible with the impact claws No. 10 - Center distance 2.70 mm in "INVERTED" points.
Info :
- The higher the number of the claw, the closer the stitches will be, the tighter the seam.
- The impact claw No. 10 - 1 tooth is also compatible with the impact claws No. 10 - Center distance 2.70 mm in "INVERTED" points.
Made in France
Sold individually
What spacing should I choose for my creation ?
Sold individually
The center distance is the distance between two points: it must be chosen according to the item you wish to create (aesthetic choice).
The different center distance / wire diameter combinations give different aesthetic results: the choice is yours!
Table given for information only:
Leather item | Total leather thickness | center distance | Wire diameter |
Small item (e.g. bookbinding, small leather goods) | Max. 2.5mm | 2.5 to 3.38mm | 0.30 to 0.53 mm |
Medium item (e.g. leather goods) | Max. 4mm | 3.38 to 3.85mm | 0.54 to 0.70 mm |
Large item (e.g. furniture, saddlery, luggage) | Max. 7mm | 4 to 6.75mm | 0.76 to 1.30 mm |
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
- 1st French site for leather work
- Physical store in Campbon (44)
- Quality leather from tanneries / tannery or destocking of major leather goods brands