Description
SINGLE NET FOR MARKING LEATHER
Use with ADECE brand power supplies and handles with heating cartridges. This tool allows you to make a simple line on the edge of your piece of leather (hot stamping technique).
You should use a metal ruler as a guide to make a straight line .
The appearance of the net on the leather depends on several parameters, such as the temperature of the tool, the type of leather, and the speed at which the hot tool passes over the leather. It is recommended to adjust these settings on scraps of the same leather before doing so on your own creation.
You can also use this tool to burn the fibers that protrude from the edge of the leather after cutting (smoothing the edge).
This tool can also be used to reheat the edge dye and thus create a hot finish.
This tool is ambidextrous : it is suitable for both right-handed and left-handed people.
Features :
- Attaches to the heated handle using the M5 thread
- Solid brass tool (for thermal conductivity) coated with nickel (to facilitate sliding during use)
Dimensions :
- Available in several widths (thickness of the thread): 0.5mm / 1mm / 1.5mm / 2mm / 2.5mm
- Maximum tool height: 13 mm
- Thread length: 19 mm
| Width | ADECE reference |
| 0.5 mm | FS001-1 |
| 1 mm | FS002-1 |
| 1.5 mm | FS003-1 |
| 2 mm | FS004-1 |
| 2.5 mm | FS005-1 |
Made in France
Non-contractual photo for the thickness of the net.
Spec Sheet or Guide/Tutorial
Before using the product, we advise you to read the safety data sheet, the instructions for use, the blog article (guide or tutorial) or the technical sheet.
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
