You will like also
Description
COLLAR BUTTON PUNCH
Round punch with a notch for punching the hole for a collar button.Straight handle - High-strength steel blade that can be sharpened.
The punch is equipped with an ejection hole for the cut-outs on the side.
These punches should be used on Ertalon plates.
Steel hammers are not recommended.
Prefer a wooden or polymer mallet.
Dimensions:
| Hole Diameter | Collar Button Loop Diameter (approx.) | Notch Length | Handle Diameter |
| 2.4 mm | 2 mm (T1) | 3 mm |
10 mm |
| 2.8 mm | 2 mm (T1) | 5 mm |
10 mm |
| 3.2 mm | 3 mm (T2 or T3) | 5 mm |
10 mm |
| 3.5 mm | 3 mm (T3) | 5 mm |
10 mm |
| 4 mm | 3 mm (T4) | 5 mm |
10 mm |
| 5 mm | 4 mm (T5) | 7 mm | 12 mm |
Total tool length: 120 mm
Tool made by a French tool manufacturer exclusively for Deco Cuir
Made in France
Made in France
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
