You will like also
STEEL OVAL HOLE PUNCH
This hole punch allows you to make oval-shaped holes in your leather. The tool is delivered perfectly sharpened for clean and easy cuts. The steel blade can be sharpened if needed.
Approximate dimensions:
| Punch Size | Length | Width |
Ivan Ref. |
|
No. 2.5 |
3 mm | 2 mm | 3779-01 |
| No. 3.0 | 3.5 mm | 2 mm | 3779-02 |
| No. 3.5 | 4 mm | 2.5 mm | 3779-03 |
| No. 4.5 | 5.5 mm | 3 mm | 3779-05 |
| No. 5.5 | 6.5 mm | 4 mm | 3779-07 |
| No. 6.5 | 8 mm | 4.5 mm | 3779-09 |
| No. 8.5 | 10.5 mm | 5.5 mm | 3779-13 |
Tool length: 105 mm
Tips:
- Do not use the punch on a metal surface that could damage the cutting edge.
- When using small punches (less than 4 mm), depending on the leather used (density, thickness...), the leather cut may tend to get stuck in the tool's evacuation channel. To prevent it from becoming severely clogged, we recommend regularly removing the cuttings with a small metal rod (round-tipped needle, round awl, etc.).
- You can also facilitate cutting by applying a little beeswax to the cutting edge of the punch before each use.
- We recommend using an ERTALON cutting board for perfect results.
- Steel hammers are not recommended. Prefer a wooden or polymer mallet.
Sold individually
Made in Taiwan
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
