STEEL COOKIE CUTTER - OBLONG SHAPE
This punch allows you to make oblong holes in your leather to pass the pin of a belt or bracelet buckle.
The tool comes perfectly sharpened for clean, easy cuts. The steel blade can be sharpened if necessary.
Approximate dimensions :
| Cookie cutter size | Length | Width |
Ref. Ivan |
|
No. 2.5 |
3.5 mm | 2 mm | 3865-01 |
| No. 3.0 | 4 mm | 2 mm | 3865-02 |
|
No. 4.0 |
5.5 mm | 3.5 mm | 3865-04 |
| No. 5.0 | 6.5 mm | 4 mm | 3865-06 |
| No. 6.0 | 8 mm | 4.5 mm | 3865-08 |
| No. 7.0 | 9 mm | 5 mm | 3865-10 |
| No. 8.0 | 10 mm | 6 mm | 3865-12 |
| No. 9.0 | 12 mm | 5 mm | 3865-13 |
| No. 10.0 | 13 mm | 7 mm | 3865-15 |
Tool length: 105 mm
Advice :
- Do not use the cutter on a metal surface as this may damage the cutting edge.
- When using small punches (less than 4 mm), depending on the leather used (density, thickness, etc.), the leather cutting may tend to get stuck in the tool's discharge channel. To prevent it from becoming severely blocked, we recommend removing the cuttings regularly using a small metal rod (round-tipped needle, round awl, etc.).
- You can also make cutting the tool easier by putting a little beeswax on the edge of the cutter before each use.
- We recommend using the ERTALON cutting plate for perfect work.
- Steel hammers are not recommended. Use a wooden or polymer mallet instead.
Sold individually
Made in Taiwan
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
