You will like also
PUNCH HOLE PUNCH
Make straight and curved holes with this punch with removable punches!
Unscrew the black metal part to place them as you wish.
Tip: for curves, punch holes 2 by 2.
The handle is made of quality metal.
The punches are made of steel and are replaceable after wear (ref. for replacement tips: TL_3053_00)
Dimensions:
- Total length of the tool: 12 cm
- Maximum width of the tool: 2.6 cm
- Handle diameter: 1.2 cm
- Hole diameter: 0.2 cm
- Distance between each hole: 0.4 cm
Tips:
- Do not use the punch on a metal surface as this may damage the cutting edge.
- Depending on the leather used (density, thickness...), the leather cut-outs may tend to get stuck in the tool's evacuation channel. To prevent it from becoming severely clogged, we advise you to regularly remove the cut-outs using a small metal rod (round-tipped needle, round awl, ...).
- You can also facilitate cutting with the tool by putting a little beeswax on the cutting edge of the punch before each use.
- We recommend using an ERTALON cutting plate for perfect work.
- Steel hammers are not recommended. Prefer a wooden or polymer mallet.
Item reference: 3152-00
This product can be used from 8 years old
Made in Taiwan for Tandy Leather
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
