Multi-purpose universal glue with brush - Renia - 1L

FAST UNIVERSAL ADHESIVE

Renia Multi-Adhesive is a universal contact adhesive that can be used on all common material combinations such as leather, rubber, TPR (thermoplastic rubber), fabric, felt, cork, PU, metal, and even plasticized PVC. You can also bond oily leather by adding 5 to 10% of Renia Härter "C" additive (ref. WA198_100).

The drying time of 3 to 15 minutes, depending on the materials, allows for quick consecutive bonding. This universal adhesive is easy to use and remains transparent when dry (does not yellow). It can be used cold or hot and can be dried under an infrared lamp.

Renia Cologne Adhesive (ref. WA190_1L) and Renia Multi-Adhesive have the same adhesive properties. Only the drying time differs: 5 to 30 minutes for Cologne adhesive and only 3 to 15 minutes for Multi-Adhesive.

INSTRUCTIONS FOR USE:
- Lightly sand the surface to be bonded with a file or grater.
- Apply a thin layer of adhesive with a brush or spatula. For firm and dense materials (e.g., rubber), the adhesive is applied to only one of the two surfaces to be bonded. For porous materials (leather, PUR...), the adhesive is applied to both surfaces to be bonded.
- Allow to dry for 3 to 15 minutes.
- Bond the two elements together and press firmly with a roller or mallet for optimal adhesion.
- If you exceed the drying time, the adhesive can be reactivated with heat (e.g., infrared lamp or hairdryer).

This adhesive is packaged in a metal can with a brush integrated into the cap for direct application. It should be stored by carefully reclosing the can after each use. In case of thickening due to solvent evaporation, Renia thinner for neoprene adhesive (ref. WA197_1L) will restore its fluidity.

Capacity: 850 g - 1 liter
Consistency: liquid
Toluene-free

Made in Germany
Brand: Renia
Cannot be shipped by air - Highly flammable liquid and vapor.
Keep out of reach of children.
Consult the safety data sheet before first use.