BONE GLUE 200G OR 500 G
Glue of bones of animal origin in pearls of brown color.
Bone glue is a
strong glue that
stiffens or shapes your leather. It will make your leather very resistant. You can also use it to glue wood, paper...
This traditional and ancestral glue has many advantages:
- By completely soaking your piece of leather in the glue: you can model the leather (the glue takes several hours to dry).
- It is reversible when hot: if necessary, it is possible to dissolve the bond by heating the parts and then repositioning them correctly.
- Environmentally friendly glue: based on 100% recyclable and biodegradable proteins. Does not contain solvent.
How to use :
- Mix the pearls with cold water (about 50g of pearls for 450ml of water) . Stir regularly for the first 15 minutes then leave to stand for about 12 hours.
- Melt this mixture in a bain-marie, stirring occasionally (do not boil the glue).
- The glue can be diluted with a little cold water if you need more glue.
- If you used a dye, you can protect it with leather balm.
- Depending on your project, you can dip your piece of leather in the glue, leave it for a few minutes so that it soaks up the glue well, and do your modelling. You can also apply the glue with a brush.
- Clean the excess glue with a few drops of water and a cloth to avoid leaving traces when drying.
- Leave to dry for several hours.
Deco Leather Advice :
Trials with leather scraps are essential to properly master the use of this glue.
Available in 200g or 500g bag
Physical and chemical properties :
- Viscosity at 60°C
- Gelling power: between 165 and 195 blooms
- pH: 5.5 / 6.5
In case of contact with skin, wash thoroughly with soap and water.
In case of eye contact, flush immediately with water for at least 10 minutes.
If swallowed, drink water and consult a doctor.
Store in a dry place at room temperature.
Origin: Italy