A screw collar button - CUBE - 8 mm - Nickel plated with 3x7mm screw

SCREW CARTRIDGE BUTTON - CUBE

The design of this cubic collar button will bring originality to your creations.

Material: Brass
Finish: Nickel plated

Dimensions of the collar button :
- Total height (without screw): 11.5 mm
- Cube width: 8 mm
- Base width: 8 mm
- Handlebar diameter: 4 mm
- Height between base and ball: 5 mm

Sold with an M3 steel screw 7 mm long (3 x 7 mm) for leather thickness between 2.5 and 5 mm.
For thicker leather, you can use longer screws ( sold separately ).

Easy assembly with a screwdriver.

Caution :
This designer clasp does not have the same behavior as “classic” ball-shaped collar buttons.
For assembly, we advise you to make a 3.5 mm diameter hole to attach the collar button to the screw.
For the passage of the head, we advise you to drill a hole with a diameter of 3.5 mm and make two slots on each side of the hole (approximately 10 mm long each).
Avoid pulling the leather too hard on the button.

Made in Europe
Sold individually