You will like also
Description
SET OF 6 ROUND PUNCHES FROM 2 TO 5 MM
These punches are made of high-quality polished steel to make cutting easier and ensure a clean, round hole. They are very durable, and their sharp edge allows you to cut leather, fabric, cardboard, etc. You can create circles of 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, and 5 mm.
The 6 tips are easy to change by screwing/unscrewing them by hand, and the included Allen key allows you to tighten/loosen them.
The handle has an attractive matte chrome finish. The set comes with a small rubber cutting mat.
Replacement tips as well as a 1.5 mm tip are sold separately (ref. 3291).
Dimensions :
- Hole diameters: 2 mm / 2.5 mm / 3 mm / 3.5 mm / 4 mm / 5 mm
- Handle length: 105 mm
- Handle diameter: 9 mm
- Total tool length with a punch attached: 120 mm
- Cutting mat: 50 x 50 x 5 mm
Tips :
- Do not use the punch on a metal surface, as this may damage the cutting edge.
- Depending on the leather used (density, thickness, etc.), leather cutouts may tend to get stuck in the tool's waste channel. To prevent it from clogging significantly, we recommend removing the cutouts regularly using a small metal rod (blunt needle, round awl, etc.).
- You can also facilitate the tool's cutting action by applying a little beeswax to the edge of the punch before each use.
- Steel hammers are not recommended. Use a wooden or polymer mallet instead.
Made in Taiwan
Item reference: 3280-00
Product suitable for use from age 12
- Hole diameters: 2 mm / 2.5 mm / 3 mm / 3.5 mm / 4 mm / 5 mm
- Handle length: 105 mm
- Handle diameter: 9 mm
- Total tool length with a punch attached: 120 mm
- Cutting mat: 50 x 50 x 5 mm
Tips :
- Do not use the punch on a metal surface, as this may damage the cutting edge.
- Depending on the leather used (density, thickness, etc.), leather cutouts may tend to get stuck in the tool's waste channel. To prevent it from clogging significantly, we recommend removing the cutouts regularly using a small metal rod (blunt needle, round awl, etc.).
- You can also facilitate the tool's cutting action by applying a little beeswax to the edge of the punch before each use.
- Steel hammers are not recommended. Use a wooden or polymer mallet instead.
Made in Taiwan
Item reference: 3280-00
Product suitable for use from age 12
Spec Sheet or Guide/Tutorial
Before using the product, we advise you to read the safety data sheet, the instructions for use, the blog article (guide or tutorial) or the technical sheet.
DECO CUIR, the leather work specialist
Since 2009, we have been supporting individuals and professionals.
-
1st French site for leather work
-
Physical store in Campbon (44)
-
Quality leather from tanneries / tannery or destocking of major leather goods brands
